Kito

Kito Heavy Duty Electric Chain Hoist, ER Series, Single Speed, 1t

Model: ER2010L
Web Price:
  • $561099
    ref: PELECT11513ER2-22A
    We do not know if nor when this product will be available again.
    1.  
    1. WLL
    2. 1t
    1. Weight
    2. 110.5lb
    1. FPM
    2. 14'
    1. Volt
    2. 575V
    1. Current Draw 575V
    2. 1.8A
Added to cart

The desired quantity or product is unavailable online.
To place a special order: 1 800 652-9759 #6805.

Spécifications

Duty Cycles
H4 (30min/h)
Hertz
60Hz
IP Water and Dust Protection
IP55
Phase
3
Standards
ASME B30.16ASME H4CSA
Voltage
575V
  1. WLL
  2. 1t
  1. C
  2. 17"
  1. D
  2. 550mm
  1. a
  2. 589mm
  1. b
  2. 376mm
  1. d
  2. 291mm
  1. e
  2. 298mm
  1. f
  2. 335mm
  1. g
  2. 31mm
  1. h
  2. 129mm
  1. i
  2. 118mm

Description

  • 1 metric tonne
  • CSA approved
  • ASME B30.16
  • ASME H4
  • IP55 dust-tight and watertight

Body

  • Die cast aluminum frame
  • Completely sealed body for environmental protection 
  • Low headroom

Gears

  • Precision, induction-heated, durable alloy steel helical gears submersed in an oil bath

Load Chain

  • Ultra-strong high-performance and corrosion resistant nickel-plated load chain, with unique short link pitch for greater resistance to fatigue and wear
  • Grade 80

Chain Guide

  • Long-lasting, heavy-duty cast iron construction, easily replaced without disassembling hoist

Hooks

  • Forged carbon steel opens gradually without fracturing under excessive loads. Bottom hook swivels 360 degrees
  • Self-closing top and bottom hooks with heavy-duty hook latch

Controls

  • Controls located on a central electrical panel
  • Control Voltage: 110 volts
  • Simple to operate plug-in connectors

Ergonomic Pushbuttons Station

  • Impact-resistant plastic with molded strain relief to prevent damage from pulling on the push button cord
  • IP65 dust-tight and watertight

Bearings

  • High-quality, anti-friction ball and roller design

Brake

  • DC current electromagnetic brake stays engaged until powered (Industry leading 10 year warranty)
  • Minimum brake torque of 200% at full load

Motor

  • Three phase
  • Standard Voltage: 575 volts
  • 60 hertz
  • Class B
  • Extreme duty, totally enclosed, fan-cooled (TEFC) squirrel cage
  • Motor fin, fan blade and fan cover design for optimum air flow

Overload Protection

  • Friction clutch located in the gearbox between motor and load gear prevents damage to hoist in the event of excessive overloading

Overtravel Protection

  • Limit switch disables controls when load block reaches upper or lower travel limit

Operating Conditions

  • Recommended for -20° to +40°C and humidity of 85% or lower